Steel Wire and Textile Braided Hydraulic Hoses Size · Working pressure
Gates® WaterBlast Water Jet Hose 1000 bar
Recommended use: High-pressure cold water cutting devices, spraying applications and high-pressure cleaning equipment.
Size · Working pressure8WB
TubeCR (chloroprene) based.
ReinforcementSix spiral layers of steel wire.
| Size | Inside diameter | Outside diameter | Working pressure | Burst pressure | Min. bend radius | Weight | Code | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| dash | DN | inch | inch | mm | PSI | MPa | PSI | MPa | mm | kg/100 m | REF |
| -8 | 12 | 1/2 | 1,06 | 27,0 | 15000 | 100,0 | 37500 | 250,0 | 230 | 141 | 8WB |
| -12 | 19 | 3/4 | 1,36 | 34,5 | 15000 | 100,0 | 37500 | 250,0 | 230 | 228 | 12WB |
Swipe to see the full table
| Tube | CR (chloroprene) based. |
|---|---|
| Reinforcement | Six spiral layers of steel wire. |
| Cover | XtraTuff™. MSHA approved. |
| Temperature range | -20°C to +70°C. |
| Standards | Patented by Gates. |
| Couplings | WTB. |
| Important | In accordance with international standards (EN 1829-2), every hose assembly must be proof pressure tested. The test pressure must be 1.5 times the maximum working pressure. The burst pressure must be at least 2.5 times the maximum working pressure. Gates Water Blast hose is not suitable for use in impulse applications. |
- Excellent resistance to weathering, oil and abrasion.
- Highly flexible spiral wire design.
- Marine: seawater cleaning on offshore platforms (no type approval)
- High-pressure water jetting: high-pressure cold water cutting, blasting and cleaning equipment
Steel Wire and Textile Braided Hydraulic Hoses
Gates® Pilot Wire and Textile Braided Hydraulic Hose
- Tube
- NBR (nitrile)
- Reinforcement
- One braid of high-tensile steel wire.
- Cover
- NBR/PVC based. MSHA approved.
Gates® MegaTech™ Steel Wire and Textile Braided Hydraulic Hose (R5)
- Tube
- CPE (chlorinated polyethylene) based.
- Reinforcement
- Single steel wire braid.
- Cover
- Petroleum-resistant woven braid, impregnated with synthetic rubber. MSHA approved.