Steel Wire and Textile Braided Hydraulic Hoses Size · Working pressure
Gates® MegaTech™ Steel Wire and Textile Braided Hydraulic Hose R5
Recommended use: Pressurized high-temperature oil return lines and air compressor lines, hydraulic steering, cab cylinders, engine and transmission cooler and filter lines.
Size · Working pressure4MEGATECH1000
TubeCPE (chlorinated polyethylene) based.
ReinforcementSingle steel wire braid.
| Size | Inside diameter | Outside diameter | Working pressure | Burst pressure | Min. bend radius | Vacuum | Weight | Code | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dash | DN | inch | inch | mm | PSI | MPa | PSI | MPa | mm | mm Hg | kg/100 m | REF |
| -4 | 6 | 1/4 | 0,52 | 13,2 | 1000 | 7,0 | 4000 | 28,0 | 50 | 760 | 18 | 4MEGATECH1000 |
| -6 | 10 | 3/8 | 0,66 | 16,8 | 1000 | 7,0 | 4000 | 28,0 | 65 | 760 | 28 | 6MEGATECH1000 |
| -8 | 12 | 1/2 | 0,8 | 20,3 | 1000 | 7,0 | 4000 | 28,0 | 90 | 760 | 36 | 8MEGATECH1000 |
| -10 | 16 | 5/8 | 0,93 | 23,6 | 1000 | 7,0 | 4000 | 28,0 | 100 | 760 | 45 | 10MEGATECH1000 |
| -12 | 19 | 3/4 | 1,15 | 29,2 | 1000 | 7,0 | 4000 | 28,0 | 120 | 760 | 60 | 12MEGATECH1000 |
| -16 | 25 | 1 | 1,37 | 34,8 | 1000 | 7,0 | 4000 | 28,0 | 150 | 760 | 71 | 16MEGATECH1000 |
| -20 | 31 | 1 1/4 | 1,64 | 41,7 | 1000 | 7,0 | 4000 | 28,0 | 210 | 760 | 124 | 20MEGATECH1000 |
| -24 | 38 | 1 1/2 | 1,95 | 49,5 | 500 | 3,5 | 2000 | 14,0 | 380 | 760 | 149 | 24MEGATECH500 |
| -32 | 51 | 2 | 2,48 | 63,0 | 500 | 3,5 | 2000 | 14,0 | 460 | 760 | 205 | 32MEGATECH500 |
| -40 | 63 | 2 1/2 | 2,97 | 75,4 | 500 | 3,5 | 2000 | 14,0 | 560 | 760 | 219 | 40MEGATECH500 |
| -48 | 76 | 3 | 3,5 | 88,9 | 500 | 3,5 | 2000 | 14,0 | 610 | 760 | 274 | 48MEGATECH500 |
Swipe to see the full table
| Tube | CPE (chlorinated polyethylene) based. |
|---|---|
| Reinforcement | Single steel wire braid. |
| Cover | Petroleum-resistant woven braid, impregnated with synthetic rubber. MSHA approved. |
| Temperature range | -40°C to +150°C. Air: -40°C to +121°C. Phosphate ester fluids: -40°C to +100°C. For water emulsions etc., see page 86. |
| Standards | Patented by Gates. Meets the requirements of the SAE J1019 performance specifications for use in high-temperature petroleum transfer systems and in high-temperature lubricating oil systems using petroleum-based oils. -4 to -20: meets SAE J1402. |
| Couplings | -4 to -20: MegaCrimp®; -24, -32: GlobalSpiral™ Plus. |
- Very good resistance to weathering and ozone.
- MegaTech™ is compatible with a variety of fluids such as hydraulic oil, phosphate esters and diesters.
- Automotive / steering: air brake (MegaTech 1000), hydraulic power steering and cab cylinder lines
- Air and water lines: air compressor lines
Steel Wire and Textile Braided Hydraulic Hoses
Gates® Pilot Wire and Textile Braided Hydraulic Hose
- Tube
- NBR (nitrile)
- Reinforcement
- One braid of high-tensile steel wire.
- Cover
- NBR/PVC based. MSHA approved.
Gates® WaterBlast Water Jet Hose (1000 bar)
- Tube
- CR (chloroprene) based.
- Reinforcement
- Six spiral layers of steel wire.
- Cover
- XtraTuff™. MSHA approved.