Steel Wire Braided Hydraulic Hoses Size · Working pressure
Gates® MXT-XTP XtraTuff Steel Wire Braided Hydraulic Hose 2SC
30 times more abrasion resistant than standard hoses
Recommended use: High-pressure hydraulic applications. Easy routing and installation in tight spaces. A multi-featured hydraulic solution with enhanced ozone and abrasion resistance.
Size · Working pressure4MXT-XTP
TubeNBR (nitrile) based.
ReinforcementBraided high-tensile steel wire.
| Size | Inside diameter | Outside diameter | Working pressure | Burst pressure | Min. bend radius | Weight | Code | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| dash | DN | inch | inch | mm | PSI | MPa | PSI | MPa | mm | kg/100 m | REF |
| -4 | 6 | 1/4 | 0,56 | 14,0 | 6000 | 42,0 | 24000 | 168,0 | 40 | 30 | 4MXT-XTP |
| -5 | 8 | 5/16 | 0,6 | 15,2 | 5500 | 38,0 | 22000 | 152,0 | 45 | 33 | 5MXT-XTP |
| -6 | 10 | 3/8 | 0,68 | 17,1 | 4800 | 33,0 | 19200 | 132,0 | 65 | 39 | 6MXT-XTP |
| -8 | 12 | 1/2 | 0,8 | 20,2 | 4000 | 28,0 | 16000 | 112,0 | 70 | 46 | 8MXT-XTP |
| -10 | 16 | 5/8 | 0,95 | 24,0 | 3625 | 25,0 | 14500 | 100,0 | 100 | 57 | 10MXT-XTP |
| -12 | 19 | 3/4 | 1,08 | 27,4 | 3100 | 21,5 | 12400 | 86,0 | 120 | 70 | 12MXT-XTP |
| -16 | 25 | 1 | 1,38 | 35,1 | 2400 | 16,5 | 9600 | 66,0 | 150 | 100 | 16MXT-XTP |
Swipe to see the full table
| Tube | NBR (nitrile) based. |
|---|---|
| Reinforcement | Braided high-tensile steel wire. |
| Cover | Gates proprietary. MSHA approved. |
| Temperature range | -40°C to +100°C. For water emulsions etc., see Engineering and technical data, page 292. |
| Standards | Exceeds ISO 11237 R16 and ISO 11237 R17 (-4 to -12). Exceeds EN 853 2SN and EN 857 2SC performance standards. Exceeds ISO 1436 R2 and ISO 11237 R19 (-4 to -8) performance standards. |
| Fittings | MegaCrimp™. |
- Low bend force for faster, more ergonomic installation.
- Lightweight construction for easier handling and reduced equipment weight.
- MXT-XTP hose is compatible with biodegradable hydraulic fluids such as synthetic esters, polyglycols and vegetable oils, as well as with petroleum-based fluids.
- Enhanced ozone and abrasion resistance.
- Superior flex-impulse performance: tested up to 600,000 impulse cycles. This is 3 times the impulse requirement of EN 857 2SC.
- Construction machinery: construction machinery and compact loaders (skid steers)
- Agricultural machinery: agricultural machinery
- Mining: mining equipment
- Marine: Lloyd's Register type approval; -4…-16, with MegaCrimp fittings
- Industrial plants / factories: injection molding machines and other stationary machinery
- Material handling (forklifts, etc.): forklifts, pallet trucks and automated guided vehicles (AGV)
- Forestry: forestry machines and log splitters
- Lifting / jacks: personnel lift platforms
Steel Wire Braided Hydraulic Hoses
Gates® MXT™ Wire Braided Hose - SAE 100R16
Gates® Pro™ ProV Wire Braided Hydraulic Hose - EN 857 2SC
- Size
- -4 · 1/4", -5 · 5/16", -6 · 3/8", -8 · 1/2", -10 · 5/8", -12 · 3/4" …
Gates® Pro™ Series Pro1T Hydraulic Hose
- Size
- -4 · 1/4", -5 · 5/16", -6 · 3/8", -8 · 1/2", -10 · 5/8", -12 · 3/4" …
Gates® M2T Steel Wire Braided Hydraulic Hose (2SC)
- Tube
- NBR (nitrile) based.
- Reinforcement
- Two braids of high-tensile steel wire.
- Cover
- NBR/PVC based. MSHA approved.
Gates® G1 Steel Wire Braided Hydraulic Hose (1SN)
- Tube
- NBR (nitrile) based.
- Reinforcement
- Single steel wire braid.
- Cover
- NBR/PVC based. MSHA approved.
Gates® G2XH Steel Wire Braided Hydraulic Hose (2SN)
- Tube
- CPE (chlorinated polyethylene) based.
- Reinforcement
- Two braids of high-tensile steel wire.
- Cover
- CSM (chlorosulfonated polyethylene) based. Blue. MSHA approved.